There are some solid tires on the market that have slip ring phenomenon, which troubles many users. So how to solve the slip ring phenomenon of solid tires? The following is a solid tire manufacturer to introduce the solution to the slip ring phenomenon:
After the solid rubber tire adopts imported fiber rubber as the tire base rubber, the heat generation performance of the tire is improved, and the temperature rise and heat generation of the tire during operation are greatly reduced; the solid tire and the rim are press-fitted together through an interference fit. Excessive body heat will cause the tire to expand and cause the tire to slip. The viscose has the advantages of good rigidity, high hardness, good stiffness, small deformation, small expansion coefficient, low heat generation, etc., so it fundamentally eliminates the slip ring phenomenon caused by the expansion of the inner hub caused by the heat generation of the tire.
Generally speaking, tire peeling is sometimes related to the selection and installation of the tire. Whether the engineering tires are installed correctly is directly related to the service life of the tires, especially when changing tires, tires with different types and patterns, because the actual size and load-carrying capacity of each engineering tire are different, so they must not be mixed arbitrarily. Tire cleaning is also very important. Whether it is before or after driving, check whether there are hard objects such as stones, iron blocks, or nails in the tire grooves. If there are any, clean them up immediately.
Since solid tires are now widely used in many industrial fields, we do not recommend storing the tires in a humid place. If environmental conditions cannot be avoided, we also recommend proper maintenance for the tires to extend the use of the tires.