Solid tires use international standard rims, which can be used with pneumatic tire rims.

Detailed process of disassembly and assembly of solid tires

1. Precautions for the installation of solid tires

1. Please use safety standard rims. Do not use deformed or damaged rims.

For the rim and tire combination, please clean the rim and tire first, and there is no debris left inside.

3. Before the rim and tire are combined. Rubber lubricant or soapy water can be used to wipe the rim flange of the tire lip. Do not use oil-based lubricants.

4. Pay attention to the fitting situation when combining the rim and the tire. Do not use the wind pressure for longer than the normal working range of the enterprise to install it forcibly, so as not to affect some dangers.

5. The combination of tyres and tires needs to be operated by a dedicated person on the tire production line.

2. Select a suitable tire press mold to press down the pad, first press the analysis rim into the tire, put on the retaining ring, change different molds, press the retaining ring into the rim, and the tire press completes the teaching work. When the tire is placed on the edge, the head should be flat and do not tilt, otherwise it will be difficult to install and will swing from side to side during use.

1. Double-piece steel rims are also called split steel rims. First, apply some special lubricating fluid to the inner wall of the tire structure.

The installation method of this tire is: single-side impact with an impact rod, but this method is only suitable for small solid tires.

2. Integral steel ring

Installation method: First apply some special lubricating fluid to the inner wall of the tire. Use a tire press to install the abrasive tools for all kinds of tires.

3. Easy to install steel ring

Installation method: First apply some special lubricating fluid to the inner wall of the tire.