How to reduce the abnormal wear of environmentally friendly industrial solid tires
Solid tires are widely used, and can be applied to construction vehicles, weeding vehicles, pallet trucks, battery trucks, forklifts, luggage trucks, excavators and other operating vehicles and special vehicles. As a high-load vehicle accessory, the wear rate of environmentally-friendly solid tires is relatively high. In order to avoid abnormal wear and tear, the installation and use of tires need to do corresponding precautions:
1. Check and correct the wheel alignment in time to ensure that the toe and camber angle meet the design requirements; check whether the rim is cracked, deformed, or obviously corroded. If so, repair or replace with high-quality rims in time to ensure that the rims and tires Matching; timely add grease according to regulations and adjust the clearance of wheel hub bearing, tie rod ball joint and kingpin bushing to the design value; keep the balance of the tire, if unbalanced, the wheel should be dynamically balanced.
2. Maintaining engineering vehicles with good technical conditions, normal driving, reasonable selection and matching of tires and reasonable loading can effectively prevent abnormal tire wear and extend the service life of tires.
3. Wheel positioning and balance are very important to ensure tire safety and ideal mileage. If the tires wear unevenly, the vehicle may have poor positioning or imbalance. These problems will not only shorten the life of tires, but also affect the handling of the vehicle, leading to danger. In order to reduce unnecessary abnormal wear, tire adjustment is necessary. Regular wheel alignment and balancing are important to ensure your driving safety and obtain the ideal mileage.
4. If the suspension system of individual wheels is abnormal, the supporting parts are bent or the individual wheels are unbalanced, it will cause the early wear of individual tires. After this happens, check the positioning of worn wheels, independent suspension springs and shock absorbers, and shorten the cycle of environmentally friendly solid tires.