Concealed leakage usually refers to the safety hazards caused by punctured or worn solid tires. If the hidden leakage of the tires is left unchecked, many accidents will occur. This requires us to inspect the tires in time and find out the problems as early as possible. When solid tire manufacturers detect concealed leaks, they usually use the following three methods:
1. Foreign body piercing: such as screws, nails, iron wires, glass shards, etc., the wounds pierced by these things will cause the tire to leak. You must carefully observe the surface of the tire during inspection. You can also sprinkle some water on the surface of the tire, and there will be damage Bubbling
2. Damage to the side of the tire: When parking or driving, if the tire is rubbed against the road teeth, the more times it will cause the damage of the side of the tire, which constitutes a dark leak and increases the probability of a puncture. If the side of the tire is damaged, it can be seen directly. If it is damaged or bulged, you must replace it with a new tire as soon as possible.
3. Deformation of the wheel hub: Deformation of the wheel hub will affect the tight fit with the tire, resulting in tire leakage. The tire can be removed and watered at the junction between the tire and the wheel hub. The place where there is air bubbles is the hidden leak of the wheel hub deformation.
The method of detecting concealed leaks for solid tire manufacturers is here today. As car owners, we must pay more attention to the condition of the road when we use the car on a daily basis, and regularly observe the condition of the tires to reduce the chance of concealed tire leakage.
Home
Phone
Message